Fotokredit: Gonzales Photo/Flemming Bo Jensen.
Tech specs
Sort Sal

Stage Size W.D.H

  • 5m x 5m x 0.60m 

Clearance on stage 

  • 2.6 to 3.6m

Kg/m2 on stage

  • 400kg

kg/m2 on audience floor

  • 400kg

Note that the stage is built out of 2m x 1m podiums

Power in Denmark is at 230V. All Power is distributed in Danish LK Plugs, EU Schuco plugs or CEE plugs. Please bring your own adapters and converters for any other plugs and/or voltage standards. 

There is 16A/1F for backline and FOH and a 16A/3F for additional light or sound equipment you may bring

PA

  • 2 x Resolution 4E tops 
  • 1 x Resolution1 SF
  • 1 x F88 Center fill 
  • 2 x F218 MK1 subs 
  • 2 x F218 MK2 subs
  • Driven by AHM & XTA processors and F1 amps

FOH control

  • Soundcraft Vi1 digital mixer with a soundcraft compact stagebox                             
  • 32in/8 lineouts /8Aes         
  • 2 line outs are used for L/R. 6 Aes outs are used for monitors 

Monitors

  • 6 x Lab Gruppen IPD2400
  • 6 x TFM420

Microphones

  • 1 x Shure SM91A
  • 1 x Shure 52A 
  • 4 x Sennheiser E604
  • 5 x Shure SM 57
  • 5 x Shure SM 58 
  • 5 x Shure BETA 58A 
  • 3 x AKG 451B
  • 8 x BSS MONO DI
  • 2 x Radial Stereo D

Other

  • 4 x 12 ch remote boxes 
  • 2 x Cat 7e guest lines 

Lighting control

  • Chamsys MagicQ
  • PC wing ASUS
  • Touchscreen PC

Dimmers

  • 2 x 12 channel dimmers
  • 10A p/ch

Lamps

  • 24 x par 56 (300W)
  • 4 x Chauvet P38
  • 4 x Clay Paky Axcor
  • 4 x 650w Fresnel  
  • 3 x Martin Mac 250 entour
  • 33 x ADJ Saber (Roomlight)

Other

  • 2 x spare DMX lines 
  • 1 x Smoke Factory Tour Haze

All rigging must be done with certified equipment. 

All fabrics hung inside Pumpehuset must have class B1 fireproof capabilities. 

All documentation on equipment and fabrics must be available on the day of the show or shown in advance. 

A load schematic must be made if you desire to hang more than 25 kg in a single point or 133 kg in total weight on a single pipe.  

All rigging done in SORT is by ladder.

The company or person in charge of the EFX/pyro will need to have all insurance needed to insure that damages on the audience and/or Pumpehuset while using fire or EFXmachines can be covered. 

Smoke

  • There is no smoke limit in Pumpehuset. But please advise in advance if your show uses smoke in an amount where visibility will be significantly decreased or next to none.   

Use of Co2 EFX machines

  • Co2 Efx machines are allowed. There will need to be placed a barricade in front of the stage to secure the safety distance from the audience to the EFX machine. No audience is allowed on stage while the co2 is plugged into power. 

Fire and Pyro

  • No pyro or stage fireworks. 
  • Candles or other small flame objects are allowed, but a dedicated “fire marshall” will need to be present during the flames' duration. 
  • Fountains/Sparkle EFX can be allowed if it produces cold sparkles. There will need to be placed a barricade in front of the stage to secure the safety distance from the audience to the EFX machine. No audience is allowed on stage while there are flames or fountains lit or plugged to power.  

Laser 

  • The use of laser fixtures is allowed in Pumpehuset. 
  • If your show shoots lasers into the crowd, you will need to show your safety calculations before you start your show. 
  • If you are unable to show these you will be limited to shoot your laser over the crowd. 

Confetti

  • Confetti is allowed in Pumpehuset. But additional fees for cleaning will occur.